Absolute Quality / Made In Finland
Crimping Machine SP2000
Side Feed Crimping Machine
Finn-Power SP-series crimping machines with open C-frame structure are optimal for crimping any odd shape, bent or otherwise complex hose assemblies.
SP2000 with 200 ton force is designed for heavier bent hose assemblies and small tubular components with large flanges.
SP2000 also available in following configurations:
- S-model with enhanced cycle time
- D-model with double head configuration (on request)
See details from specific product cards.
Features
- Control
- ICC (7” touchscreen)
- Models
- No other models available
- Standard Features
- Foot pedal (part no 691563)
- QuickChange-tool (part no 691043)
- Pressure crimping ICC1
- Step crimping ICC2
- Options
- Foot pedal, Z-model (part no 691563)
- Remote control unit R2 (double hand)
- Quality control ICC3
- Graphical quality control ICC4
- Interface pack ETH (Communication TCP/IP & UDP)
- A3 signal
- Bar Code Reader BCR
- Oil Condition Monitoring OCM
Technical Data
| Technical Data | |
|---|---|
| Crimping range (mm) ¹ | 10-54 |
| Crimping range (inch) ¹ | 0.39-2.12 |
| Max crimping force (kN) | 2000 |
| Max crimping force (tonnage) | 200 |
| Cycle time 10 mm (s) ² | 2.4 |
| Hose size ID (inch) | 1 ¼ |
| Die set series ³ | 20 |
| Max opening (mm) ⁴ | +25/+63 |
| Master die D/L (mm) | 84/78 |
| Master die D/L (inch) | 1.81/3.0 |
| Motor Power (kW/HP) | 5.5/7.5 |
| Oil tank volume | 135 l |
| Dimensions (LxWxH) | |
| Machine (mm) | 1062x970x2004 |
| Hydraulic unit (mm) | 713x705x1060 |
| Machine (inch) | 59.4x37.4x88.6 |
| Hydraulic unit (inch) | 28.0x27.8x41.7 |
| Weight (KG/LBS) | |
| Machine | 1940/3936 |
| Hydraulic unit | 182/402 |
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set 20-series
| Die Set No | D (mm) | L (mm) | Crimp. range (mm) |
|---|---|---|---|
| 18013/10 | 10 | 55 | 10.0-12.0 |
| 18013/12 | 12 | 55 | 12.0-14.0 |
| 18013/14 | 14 | 55 | 14.0-16.0 |
| 18013/16 | 16 | 55 | 16.0-19.0 |
| 18013/19 | 19 | 55 | 19.0-23.0 |
| 18013/23 | 23 | 55 | 23.0-27.0 |
| 18013/27 | 27 | 70 | 27.0-31.0 |
| 18013/31 | 31 | 70 | 31.0-36.0 |
| 18013/36 | 36 | 75 | 36.0-41.0 |
| 18013/41 | 41 | 75 | 41.0-47.0 |
| 18013/47 | 47 | 85 | 47.0-54.0 |
| 18013/54 | 54 | 85 | 54.0-61.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.