Absolute Quality / Made In Finland
Crimping Machine NC40
Nut and Cable Crimping Machine
Finn-Power NC-machines have proven to be the most reliable and widely used nut crimping machines in the industry. NC-machines provide fast and accurate crimping for fitting manufacturing.
With 93 ton force and 140mm master dies NC40 is the second biggest NC-machine in the range. NC40 can be used also for other applications with short crimping length eg. connectors, small hoses, rings, tubes and sensors.
Adjustable back stop enables quick set up for different products. A special centering pin, selected according to ferrule size, can be used during the crimping.
Also available as Z-model with separate crimping head and hydraulic unit.
Features
- Control
- ICC (7” touchscreen)
- Models
- No other models available
- Standard Features
- Foot pedal (Standard)
- Mechanical back stop device
- Pressure crimping ICC1
- Step crimping ICC2
- Options
- Adapter dies for NC20-series (part no 702079)
- Adapter dies for NC30-series (part no 702758)
- Foot pedal (Z-model) (part no 691563)
- Auto greasing G3
- Oil Condition Monitoring OCM
- Quality control ICC3
- Graphical quality control ICC4
- Remote control unit R2 (double hand)
- Interface pack ETH (Communication TCP/IP & UDP)
- A3 signal
- Bar Code Reader BCR
Technical Data
| Technical Data | |
|---|---|
| Crimping range (mm) ¹ | 12-105 |
| Crimping range (inch) ¹ | 0.47-4.13 |
| Max crimping force (kN) | 930 |
| Max crimping force (tonnage) | 93 |
| Cycle time 10 mm (s) ² | 1.9 |
| Hose size ID (inch) | 2 |
| Die set series | NC20 / NC30 / NC40 |
| Max opening (mm) ³ | +26 |
| Max opening without dies (mm) | 166 |
| Master die D/L (mm) | 140/37 |
| Master die D/L (inch) | 4.0/5.5 |
| Motor Power (kW/HP) | 4.0/5.5 |
| Oil tank volume | 50 l |
| Z-model availability | Yes |
| DIMENSIONS (LxWxH) | |
| Standard (mm) | 835x885x997 |
| Standard (inch) | 32.9x34.8x39.3 |
| Z-model head (mm) | 406x372x395 |
| Z-model hydraulic unit (mm) | 653x473x711 |
| Z-model head (inch) | 15.9x14.6x15.6 |
| Z-model hydraulic unit (inch) | 25.7x18.6x27.9 |
| WEIGHT (KG/LBS) | |
| Standard | 288/529 |
| Z-model head | 129/284 |
| Z-model hydraulic unit | 96/211 |
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10mm cycle.
3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
2) Theoretical with 10mm cycle.
3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set NC20-series
| Die set no | D (mm) | L (mm) | Crimp. Range (mm) |
|---|---|---|---|
| 18546/12 | 12 | 3 | 12.0-16.0 |
| 18546/16 | 16 | 4 | 16.0-12.0 |
| 18546/22 | 22 | 4.5 | 22.0-27.0 |
| 18546/27 | 27 | 5 | 27.0-34.0 |
| 18546/34 | 34 | 5 | 34.0-41.0 |
| 18546/41 | 41 | 5 | 41.0-49.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.
Die Set NC30-series
| Die set no | D (mm) | L (mm) | Crimp. Range (mm) |
|---|---|---|---|
| 702044/12 | 12 | 3 | 12.0-14.0 |
| 702044/14 | 14 | 3 | 14.0-16.0 |
| 702044/16 | 16 | 4 | 16.0-19.0 |
| 702044/19 | 19 | 4 | 19.0-22.0 |
| 702044/22 | 22 | 4.5 | 22.0-26.0 |
| 702044/26 | 26 | 4.5 | 26.0-30.0 |
| 702044/30 | 30 | 5 | 30.0-34.0 |
| 702044/34 | 34 | 5 | 34.0-39.0 |
| 702044/39 | 39 | 5 | 39.0-45.0 |
| 702044/45 | 45 | 5 | 45.0-51.0 |
| 702044/51 | 51 | 5 | 51.0-57.0 |
| 702044/57 | 57 | 5 | 57.0-63.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.
Die Set NC40-series
| Die set no | D (mm) | L (mm) | Crimp. Range (mm) |
|---|---|---|---|
| 703955/63 | 3 | 5 | 63.0-69.0 |
| 703955/69 | 69 | 5 | 69.0-73.0 |
| 703955/73 | 73 | 6 | 73.0-81.0 |
| 703955/81 | 81 | 7 | 81.0-93.0 |
| 703955/93 | 93 | 7 | 93.0-105.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.