Absolute Quality / Made In Finland
Crimping Machine FP120
Crimping Machine for Production
The legend is reborn. The new Finn-Power FP120 is compact and easy to use, designed to handle the highest production volumes.
Unbeaten in terms of speed, precision, durability and quality. FP120 is available with separate hydraulic unit or as a compact model. With separate hydraulic unit, access to the back side of the machine is free, when part feeding from the back is needed.
Features
- Control
- ICC (7” touchscreen)
- SCC (5” touchscreen)
- Models
- No other models available
- Standard Features
- QuickChange-tool (part no 701049)
- Electric backstop device (part no 705183)
- Mirror (part no 054010)
- Die racks (part no: 721486)
- The same part goes for right and left.
- Pressure crimping (ICC only)
- Step crimping
- Options for SCC & ICC
- Foot pedal (part no 691563)
- Side table (part no: 719216 (right), 719152 (left)
- Side die rack, 5 slots (Compact only) (part no 717685)
- Die rack, 9 slots (part no: 721486)
- The same part goes for right and left.
- Mechanical back stop device (part no 704920)
- Interface pack ETH (Communication TCP/IP & UDP)
- Oil cooler J3 **
- Horizontal Back layout HB
- Horizontal Side layout HS
- Options for ICC only
- Smart die rack SDR (8 or 16 slot model available)
- Quality control ICC3
- Graphical quality control ICC4
- Auto greasing G3
- Bar Code Reader BCR
- Speed adjustment **
- Oil Condition Monitoring OCM
- Industry 4.0
- A3 signal
- Camera with 7” display
Technical Data
| Technical Data | |
|---|---|
| Max crimping dia (mm/inch) ¹ | 87/3.42 |
| Max crimping dia with master dies (mm/inch) | 109/4.3 |
| Max crimping force (kN) | 2800 |
| Max crimping force (tonnage) | 280 |
| Cycle time 10 mm (s) ² | 1.8 (S-model: 1.6) |
| Hydraulic hose size (inch) | 2 * |
| Industrial hose size (inch) | 3.42 * |
| Die set series ³ | 32 |
| Max opening (mm) ⁴ | +68 |
| Max opening without dies (mm) | 167 |
| Master die D/L (mm) | 99/97 |
| Master die D/L (inch) | 3.90/3.82 |
| Motor Power (kW/HP) | 5.5/7.5 |
| Oil tank volume | 135 l |
| DIMENSIONS (LxWxH) | |
| Machine (mm) | 881X664X1561 |
| Hydraulic unit (mm) | 782X753X1043 |
| Machine (inch) | 34.7X26.1X61.5 |
| Hydraulic Unit (inch) | 30.8X29.6X41.0 |
| WEIGHT (KG/LBS) | |
| Machine | 875/1925 |
| Hydraulic Unit | 220/484 |
| Compact setup | 1060/2332 |
* According to the fitting.
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set 32-series
| Die set no | D (mm) | L (mm) | Crimp. Range (mm) |
|---|---|---|---|
| 18506/10 | 10 | 55 | 10.0-12.0 |
| 18506/12 | 12 | 55 | 12.0-14.0 |
| 18506/14 | 14 | 55 | 14.0-16.0 |
| 18506/16 | 16 | 55 | 16.0-19.0 |
| 18506/19 | 19 | 55 | 19.0-22.0 |
| 18506/22 | 22 | 70 | 22.0-26.0 |
| 18506/26 | 26 | 70 | 26.0-30.0 |
| 18506/30 | 30 | 70 | 30.0-34.0 |
| 18506/34 | 34 | 75 | 34.0-39.0 |
| 18506/39 | 39 | 75 | 39.0-45.0 |
| 18506/45 | 45 | 90 | 45.0-51.0 |
| 18506/51 | 51 | 90 | 51.0-57.0 |
| 18506/57 | 57 | 100 | 57.0-63.0 |
| 18506/63/110 | 63 | 110 | 63.0-69.0 |
| 18506/69/110 | 69 | 110 | 69.0-75.0 |
| 18506/74/110 | 74 | 110 | 74.0-80.0 |
| 18506/78/110 | 78 | 110 | 78.0-87.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.