Finn-Power P32SCC is strong, fast and reliable crimping machine for any service crimping need.
This model turns hydraulics off to conserve energy, and to reduce workplace noise levels whenever the machine is idle.
SCC control brings smartness to workshop crimpers via connectivity and visual user interface, including step crimping as a standard feature. Optional single foot pedal can be connected to workshop SCC models.
|SCC (5” touchscreen)||No other models available|
Mechanical back stop device
Electrical back stop device
Tool base (20 slots) with QuickChange-tool
Tool rack (16 slots) with QuickChange-tool
|Max crimping dia (mm)¹||87|
|Max crimping dia (inch)¹||3.42|
|Max crimping force (kN)||2000|
|Max crimping force (tonnage)||200|
|Cycle time 10 mm (s)² ³||4.0/16.1|
|Hose size ID (inch)||2 *|
|Die set series||32|
|Max opening (mm)4||+33|
|Max opening without dies (mm)||132|
|Master die D/L (mm)||99/80|
|Master die D/L (inch)||3.90/3.15|
|Motor Power (kW/HP)³||4.0/1.5 5.5/2.0|
|Oil tank volume||27 l|
* According to the fitting.
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10 mm cycle.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
|DieSetNo||D (mm)||L (mm)||Crimp. range (mm)|
In addition to the standard die sets, a wide range of special die sets is available on request.