P32X

Service

P32X

AFFORDABLE CRIMPER FOR SERVICE USE

Entry level crimping machine for occational service use and small workshops. For more demanding crimping needs please see P32NMS.
Control Models
MS No other models available
Options
Mechanical back stop device (part no 705510)
Tool base with QuickChange-tool (part no 702641)
Tool rack with QuickChange-tool (part no 692740)
QuickChange-tool (part no 701049)
Technical Data
TECHNICAL DATA
Max crimping dia (mm/inch) 1) 87/3.42
Max crimping dia with master dies (mm/inch) 109/4.3
Max crimping force (kN) 2000
Max crimping force (tonnage) 200
Cycle time 10 mm (s) 2) 3) 8.7/21.1
Hydraulic hose size (inch) 2 *
Industrial hose size (inch) 3.42 *
Die set series 32
Max opening (mm) 4) +33
Max opening without dies (mm) 132
Master die D/L (mm) 99/80
Master die D/L (inch) 3.90/3.15
Motor Power (kW/HP)³ 2.2/3.0 1.5/2.0
Oil tank volume 7 l
DIMENSIONS (LxWxH)
(mm) 632x521x567
(inch) 24.9x20.6.x22.4
WEIGHT
KG/LBS 155/331

* According to the fitting.
1) With standard dies. Crimping range can be
increased with special dies.
2) Theoretical with 10 mm cycle.
3) 3-phase/1-phase
4) Maximum opening is the total die travel. Add
this value to the minimum crimping diameter
of the die set used. The result is the maximum
opening of the machine with die set in place.

Die Set 32-series
DieSetNo D (mm) L (mm) Crimp. range (mm)
18506/10 10 55 10.0-12.0
18506/12 12 55 12.0-14.0
18506/14 14 55 14.0-16.0
18506/16 16 55 16.0-19.0
18506/19 19 55 19.0-22.0
18506/22 22 70 22.0-26.0
18506/26 26 70 26.0-30.0
18506/30 30 70 30.0-34.0
18506/34 34 75 34.0-39.0
18506/39 39 75 39.0-45.0
18506/45 45 90 45.0-51.0
18506/51 51 90 51.0-57.0
18506/57 57 100 57.0-63.0
18506/63/110 63 110 63.0-69.0
18506/69/110 69 110 69.0-75.0
18506/74/110 74 110 74.0-80.0
18506/78/110 78 110 78.0-87.0

In addition to the standard die sets, a wide range of special die sets is available on request.