CS-models have been designed for service van use. CS machines are battery powered with 12V or 24V, crimping head on left as standard.
New Smart Crimping Control (SCC) brings smartness and connectivity for service and workshop machines. It is easy to use with features such as diameter crimping, recipes and data recording. A magnetic attachment makes it easy to change the place of control.
|SCC (5” touchscreen)||Standard CS SCC left|
Mechanical back stop device
Electrical back stop device
|Max crimping dia (mm)¹||87|
|Max crimping dia (inch)¹||3.42|
|Max crimping force (kN)||2000|
|Max crimping force (tonnage)||200|
|Cycle time 10 mm (s)²||21.1|
|Hose size ID (inch)||2 *|
|Die set series||32|
|Max opening (mm)²||+33|
|Max opening without dies (mm)||132|
|Master die D/L (mm)||99/80|
|Master die D/L (inch)||3.90/3.15|
|Motor Power (kW)³||1.6/2.2|
|Motor Power (HP)³||2.1/3.0|
|Oil tank volume||5 l|
* According to the fitting.
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10 mm cycle.
3) 12V / 24V. Overload controlled
|DieSetNo||D (mm)||L (mm)||Crimp. range (mm)|
In addition to the standard die sets, a wide range of special die sets is available on request.