Finn-Power P20HP is hand pump operated hydraulic crimping machine for repair workshops and service van use. This hand-operated crimping machine works in places where electricity or compressed air are not available.
HPL-model also available (MS-control device and indication light when crimping diameter reached).
Control | Models | |
---|---|---|
Manual | ||
Options | ||
Tool rack with QuickChange-tool (part no 415663) QuickChange-tool (part no 691043) Mechanical back stop device (part no 705509) |
Technical Data
TECHNICAL DATA | |
---|---|
Max crimping dia (mm/inch) 1) | 61/2.40 |
Max crimping dia with master dies (mm/inch) | 94/3.7 |
Max crimping force (kN) | 1370 |
Max crimping force (tonnage) | 137 |
Hydraulic hose size (inch) | 1 ½ * |
Industrial hose size (inch) | 2.40 * |
Die set series | 20 |
Max opening (mm) 2) | +25 |
Max opening without dies (mm) | 109 |
Master die D/L (mm) | 84/80 |
Master die D/L (inch) | 3.31/3.15 |
Motor Power | Hand pump |
DIMENSIONS (LxWxH) | |
(mm) | 487x441x389 |
(inch) | 19.2x17.4x15.4 |
WEIGHT | |
KG/LBS | 66/146 |
* According to the fitting.
1) With standard dies. Crimping range can be increased with special dies.
2) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set 20-series
DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
---|---|---|---|
18013/10 | 10 | 55 | 10.0-12.0 |
18013/12 | 12 | 55 | 12.0-14.0 |
18013/14 | 14 | 55 | 14.0-16.0 |
18013/16 | 16 | 55 | 16.0-19.0 |
18013/19 | 19 | 55 | 19.0-23.0 |
18013/23 | 23 | 55 | 23.0-27.0 |
18013/27 | 27 | 70 | 27.0-31.0 |
18013/31 | 31 | 70 | 31.0-36.0 |
18013/36 | 36 | 75 | 36.0-41.0 |
18013/41 | 41 | 75 | 41.0-47.0 |
18013/47 | 47 | 85 | 47.0-54.0 |
18013/54 | 54 | 85 | 54.0-61.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.