Finn-Power P16HP is hand pump operated hydraulic crimping machine for repair workshops and field use. Easy to use, light and compact in size, allowing to be carried to any location. This hand-operated portable machine works even in places where electricity or compressed air are not available.
Available also with air pressure (AP-model) and separate head/power pack configuration (Z-model).
| Control | Models | |
|---|---|---|
| Manual |
Z-model AP-model |
|
| TECHNICAL DATA | |
|---|---|
| Max crimping dia (mm/inch) 1) | 45/1.77 |
| Max crimping dia with master dies (mm/inch) | 49/1.9 |
| Max crimping force (kN) | 955 |
| Max crimping force (tonnage) | 95 |
| Hydraulic hose size (inch) | 1 * |
| Industrial hose size (inch) | 1.77 * |
| Die set series | 16 |
| Max opening (mm)2) | +20 |
| Max opening without dies (mm) | 59 |
| Master die D/L (mm) | 39/64 |
| Master die D/L (inch) | 1.54/2.52 |
| Motor Power | Hand pump |
| DIMENSIONS (LxWxH) | |
| (mm) | 331x401x271 |
| (inch) | 13.1x15.8x10.7 |
| WEIGHT | |
| KG/LBS | 26/57 |
| DIMENSIONS P16HPZ (LxWxH) | |
| Crimping head (mm) | 197x228x333 |
| Crimping head (inch) | 7.7x8.9x13.1 |
| Hydraulic unit (mm) | 121x406x145 |
| Hydraulic unit (inch) | 4.7x5.9x5.7 |
| Weight (kg/lbs) | 26/57.2 |
| Hose length (metres) | 4 |
* According to the fitting.
1) With standard dies. Crimping range can be increased with special dies.
2) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
| DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
|---|---|---|---|
| 18212/10 | 10 | 55 | 10.0-12.0 |
| 18212/12 | 12 | 55 | 12.0-14.0 |
| 18212/14 | 14 | 55 | 14.0-16.0 |
| 18212/16 | 16 | 55 | 16.0-19.0 |
| 18212/19 | 19 | 55 | 19.0-23.0 |
| 18212/23 | 23 | 55 | 23.0-27.0 |
| 18212/27 | 27 | 65 | 27.0-31.0 |
| 18212/31 | 31 | 65 | 31.0-38.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.
Videos
