FP175 is the flagship of the FP-series with 830tons force and 12” crimping diameter. It is suitable for wide range of applications requiring large capacity in force and diameter. FP175 with extra long master dies provides long forming with single stroke especially in tube and pipe applications.
Control | Models | |
---|---|---|
ICC (7” touchscreen) | No other models available | |
Standard Features | Options | |
Adapter dies for FP160-series dies (part no 404916) Foot pedal (part no 691563) Pressure crimping ICC1 Step crimping ICC2 |
Adapter dies for 32-series dies (part no 302008) QuickChange-tool 32-series dies (part no 701049) Smart die rack SDR (16 slot) Auto greasing G3 Interface pack ETH (Communication TCP/IP & UDP) A3 signal Oil cooler J3** Pinning support mandrel Quality control ICC3 Graphical quality control ICC4 Bar Code Reader BCR Speed adjustment ** Oil Condition Monitoring OCM Industry 4.0 Camera with 7” display Horizontal Back layout HB Horizontal Side layout HS ** Will have impact on motor size, hydraulic unit dimensions and weight |
TECHNICAL DATA | |
---|---|
Max crimping dia (mm) ¹ | 320 |
Max crimping dia (inch) ¹ | 12.60 |
Max crimping force (kN) | 8300 |
Max crimping force (tonnage) | 830 |
Cycle time 10 mm (s) ² | 3.2 |
Hose size ID (inch)³ | 10 |
Die set series | 32 ³ / 160 ³ / 170 |
Max. opening (mm) ⁴ | +155 |
Max opening without dies (mm) | 475 |
Master die D/L (mm) | 320/220 |
Master die D/L (inch) | 12.60/8.66 |
Motor Power (kW/HP) | 11/15 |
Oil tank volume | 250 l |
DIMENSIONS (LxWxH) | |
Machine (mm) | 1200x936x2220 |
Hydraulic Unit (mm) | 1195x705x1411 |
Machine (inch) | 47.3x36.9x81.9 |
Hydraulic Unit (inch) | 47.0x27.8x44.9 |
WEIGHT (KG/LBS) | |
Machine | 4455/9801 |
Hydraulic Unit | 305/671 |
1) With standard dies. Crimping range can be
increased with special dies.
2) Theoretical with 10 mm cycle.
3) According to the fitting.
4) Maximum opening is the total die travel. Add
this value to the minimum crimping diameter
of the die set used. The result is the maximum
opening of the machine with die set in place.
DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
---|---|---|---|
405060/205 | 205 | 220 | 205.0-220.0 |
405060/220 | 220 | 220 | 220.0-235.0 |
405060/235 | 235 | 220 | 235.0-250.0 |
405060/250 | 250 | 220 | 250.0-270.0 |
405060/270 | 270 | 220 | 270.0-290.0 |
405060/290 | 290 | 220 | 290.0-320.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.
DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
---|---|---|---|
18852/84 | 84 | 116 | 84.0-92.0 |
18852/92 | 92 | 116 | 92.0-100.0 |
18852/100 | 100 | 116 | 100.0-108.0 |
18852/108 | 108 | 116 | 108.0-116.0 |
18852/116 | 116 | 116 | 116.0-126.0 |
18852/126 | 126 | 116 | 126.0-136.0 |
18852/136 | 136 | 116 | 136.0-146.0 |
18852/146 | 146 | 116 | 146.0-156.0 |
18852/156 | 156 | 116 | 156.0-166.0 |
18852/166 | 166 | 116 | 166.0-178.0 |
18852/178 | 178 | 116 | 178.0-190.0 |
18852/190 | 190 | 116 | 190.0-202.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.
DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
---|---|---|---|
18506/10 | 10 | 55 | 10.0-12.0 |
18506/12 | 12 | 55 | 12.0-14.0 |
18506/14 | 14 | 55 | 14.0-16.0 |
18506/16 | 16 | 55 | 16.0-19.0 |
18506/19 | 19 | 55 | 19.0-22.0 |
18506/22 | 22 | 70 | 22.0-26.0 |
18506/26 | 26 | 70 | 26.0-30.0 |
18506/30 | 30 | 70 | 30.0-34.0 |
18506/34 | 34 | 75 | 34.0-39.0 |
18506/39 | 39 | 75 | 39.0-45.0 |
18506/45 | 45 | 90 | 45.0-51.0 |
18506/51 | 51 | 90 | 51.0-57.0 |
18506/57 | 57 | 100 | 57.0-63.0 |
18506/63/110 | 63 | 110 | 63.0-69.0 |
18506/69/110 | 69 | 110 | 69.0-75.0 |
18506/74/110 | 74 | 110 | 74.0-80.0 |
18506/78/110 | 78 | 110 | 78.0-87.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.