SCC control brings smartness to serial production crimpers via connectivity and visual user interface, including step crimping as a standard feature. The control brings necessary basic features for entry-level higher volume production.
FP120SCC is compact and easy to use, designed to handle the highest production volumes.
Unbeaten in terms of speed, precision, durability and quality. Depending on available space, or the operational space need behind the machine, the hydraulic and crimping unit can be separated or combined.
| Control | Models | |
|---|---|---|
| SCC (5” touchscreen) | No other models available | |
| Standard Features | Options | |
|
Foot pedal (part no 691563) Side table (part no: 719216 (right), 719152 (left) Side die rack, 5 slots (Compact only) (part no 717685) Die rack, 9 slots (not for compact) (part no: 714266 (right), 714267 (left) Mechanical back stop device (part no 704920) Interface pack ETH (Communication TCP/IP & UDP) Oil cooler J3 ** Combi unit (crimping and hydraulic unit combined) Pinning support mandrel Horizontal Back layout HB Horizontal Side layout HS ** Will have impact on motor size, hydraulic unit dimensions and weight. |
Foot pedal Front table Quality die rack Fitting storage Mechanical back stop device Auto greasing G3 Oil cooler ** Combi unit (crimping and hydraulic unit combined) Pinning support mandrel Horizontal Back layout HB Horizontal Side layout HS Remote control (R1, R2) Quality control ICC3 Graphical quality control ICC4 Interface pack ETH (Communication TCP/IP & UDP) A3 signal (cable not included) Bar Code Reader BCR Speed adjustment ** Oil Condition Monitoring OCM Industry 4.0 Camera (requires 12” display) Safety Scanner ** Will have impact on motor size, hydraulic unit dimensions and weight. |
|
| TECHNICAL DATA | |
|---|---|
| Max crimping dia (mm/inch)¹ | 87/3.42 |
| Max crimping dia with master dies (mm/inch) | 109/4.3 |
| Max crimping force (kN) | 2800 |
| Max crimping force (tonnage) | 280 |
| Cycle time 10 mm (s)² | 1.8 (S-model: 1.6) |
| Hydraulic hose size (inch) | 2 * |
| Industrial hose size (inch) | 3.42 * |
| Die set series | 32 |
| Max. opening (mm)3 | +68 |
| Max opening without dies (mm) | 167 |
| Master die D/L (mm) | 99/97 |
| Master die D/L (inch) | 3.90/3.82 |
| Motor Power (kW/HP) | 6.5/8.8 |
| Oil tank volume | 135 l |
| DIMENSIONS (LxWxH) | |
| Machine (mm) | 881X664X1561 |
| Hydraulic Unit (mm) | 782X753X1043 |
| Machine (inch) | 34.7X26.1X61.5 |
| Hydraulic Unit (inch) | 30.8X29.6X41.0 |
| WEIGHT (KG/LBS) | |
| Machine | 875/1925 |
| Hydraulic Unit | 220/484 |
| Compact setup | 1060/2332 |
| * ACCORDING TO THE FITTING. | |
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10 mm cycle.
3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
| DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
|---|---|---|---|
| 18506/10 | 10 | 55 | 10.0-12.0 |
| 18506/12 | 12 | 55 | 12.0-14.0 |
| 18506/14 | 14 | 55 | 14.0-16.0 |
| 18506/16 | 16 | 55 | 16.0-19.0 |
| 18506/19 | 19 | 55 | 19.0-22.0 |
| 18506/22 | 22 | 70 | 22.0-26.0 |
| 18506/26 | 26 | 70 | 26.0-30.0 |
| 18506/30 | 30 | 70 | 30.0-34.0 |
| 18506/34 | 34 | 75 | 34.0-39.0 |
| 18506/39 | 39 | 75 | 39.0-45.0 |
| 18506/45 | 45 | 90 | 45.0-51.0 |
| 18506/51 | 51 | 90 | 51.0-57.0 |
| 18506/57 | 57 | 100 | 57.0-63.0 |
| 18506/63/110 | 63 | 110 | 63.0-69.0 |
| 18506/69/110 | 69 | 110 | 69.0-75.0 |
| 18506/74/110 | 74 | 110 | 74.0-80.0 |
| 18506/78/110 | 78 | 110 | 78.0-87.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.
