Finn-Power NC-machines have proven to be the most reliable and widely used nut crimping machines in the industry. NC-machines provide fast and accurate crimping for fitting manufacturing.
NC20 can be used also for other applications with short crimping length eg. connectors, small hoses, rings, tubes and sensors.
Adjustable back stop enables quick set up for different products. A special centering pin, selected according to ferrule size, can be used during the crimping.
Also available as Z-model with separate crimping head and hydraulic unit.
|ICC||No other models available|
Pressure crimping ICC1
Step crimping ICC2
Foot pedal (Standard)
Mechanical back stop device
Foot pedal (Z-model)
Auto greasing G3
Oil cooler **
** Will have impact on motor size, hydraulic unit dimensions and weight.
Quality control ICC3
Graphical quality control ICC4
Remote control unit
Interface pack ETH (Communication TCP/IP & UDP)
Bar Code Reader BCR
|Crimping range (mm) ¹||12-49|
|Crimping range (inch) ¹||0.47-1.93|
|Max crimping force (kN)||500|
|Max crimping force (tonnage)||50|
|Cycle time 10 mm (s) ²||1.5|
|Hose size ID (inch)||1 1/4|
|Die set series||NC20|
|Max. opening (mm) ³||+18|
|Max opening without dies (mm)||117|
|Master die D/L (mm)||99/22|
|Master die D/L (inch)||3.90/0.87|
|Motor Power (kW/HP)||3.0/4.0|
|Oil tank volume||32 l|
|Z-model head (mm)||321x340x395|
|Z-model hydraulic unit (mm)||597x436,5x651|
|Z-model head (inch)||12.6x13.4x17.2|
|Z-model hydraulic unit (inch)||25.6x17.2x23.5|
|Z-model hydraulic unit||103/227|
2) Theoretical with 10mm cycle.
3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
|DieSetNo||D (mm)||L (mm)||Crimp. range (mm)|
In addition to the standard die sets, a wide range of special die sets is available on request.